Tri-Bed Business Deionizer
Water Quality: 500 K or 12 Mohm/cm with mixed bed polisher
This system is perfect for the medium volume detailer, or for any manufacturing process where space is not an issue that needs volume and high flow rates.
Tri-Bed Business Deionizer
Water Quality: 500 K or 12 Mohm/cm with mixed bed polisher
This system is perfect for the medium volume detailer, or for any manufacturing process where space is not an issue that needs volume and high flow rates.
This 3-stage unit will provide high quality DI water at the lowest cost per gallon, and upwards of 4000 gallons of DI water. Made up of one approximately 1 cubic foot cation tank and two anion tanks, this model will produce 50% more water than the Dual Bed Business model. The Tri-Bed Business Model and Ultra Business Model will produce more water than any other portable deionizer on the market. Built of sturdy fiberglass, this system will give you years of use. Comes complete with the deionizer units, 4' high pressure hose, a hand-held TDS meter, and a cap/plug for the inlet/outlet.
Approximate # of rinses before refilling, assuming TDS of 250 PPM, 2 GPM, using 5 gallons per car and 30 gallons per RV.
Car - 538
RV Class A - 90
Let us know if you need the mixed bed polisher.
| TDS (PPM) | Capacity in Gallons |
| 100 | 6,725 |
| 200 | 3,360 |
| 250 | 2,690 |
| 300 | 2,240 |
| 400 | 1,680 |
Part Number: OTG2-TDIL
Size: 48" H X 6.75" D
Weight: 150 LBS total and 50 LBS each
Tank: 0.90 CU FT each
Flow Rate: Less than 5 gallons/minute for best performance & effectiveness
Virgin Non-regenerated Resin
Let us know if you need the mixed bed polisher.
